انتخاب صفحه

These rack & pinion drives are ideal for a wide variety of applications, including axis drives requiring precise positioning & repeatability, traveling gantries & columns, pick & place robots, and materials handling systems. Weighty load capacities and duty cycles may also be easily taken care of with these drives. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.

ضرورت وجود یک سطح نصب جداگانه برای ریل را از بین می برد
Additional alignment between the rack and rail isn’t necessary
Space-conserving, performance optimized designs may be accomplished
Different quality racks available for best price-performance ratio
اجازه می دهد تا مونتاژ رک و ریل از قاب ماشین باشد
This rack range further expands the already wide range of ATLANTA rack & pinion drives. With this range, it is possible to achieve optimal styles for every application constraints. For recommendations on how to integrate the Integrated Rack into your design, please consult the factory.

Teeth: The teeth will be the portion of the apparatus that makes contact with another gear. To ensure that two gears to mesh with each other the pitch must be the same for all mating pairs. The pitch of a gear is the distance between equivalent points of adjacent teeth. When the teeth of gears mesh properly they prevent slipping and will exhibit efficiencies of up to 98%.
Our Integrated Racks install directly to most standard linear guides, eliminating the need for additional machining and alignment, saving time and money. Key benefits include:

Radius: The gear دنده دنده ای برای محور راه آهن radius is defined differently depending on the particular section of the gear being discussed. Both most relevant measurements, nevertheless, will be the root radius and the addendum radius. The main radius is the distance from the center of the gear to the bottom of the teeth as the addendum radius (also known as the “pitch” radius) may be the distance from the guts of the apparatus to the exterior of the teeth.

In order to make sure that the apparatus rack you purchase is right for the application, seek out a trusted and skilled gear rack manufacturer who’ll take time to listen to your application to be able to suggest the proper product. Depending on the application and the requirements of this application, the teeth on the apparatus rack may need to become spaced a particular way in order to provide correct torque and efficiency. This small change can make an environment of difference in how your steering program or railway track functions.
Gears are mechanisms that mesh together via teeth and so are used to transmit rotary motion from one shaft to some other. Gears are described by two important items: radius and number of tooth. They are typically mounted, or connected to other parts, via a shaft or base.

نماد منوی سمت چپ